The McIntosh MT10 Turntable marries classic McIntosh glass front panel cosmetics with serious mechanics to create a unique, ready-to-play LP solution. With tracking force, anti-skate and cartridge position preset at the factory, the McIntosh MT10 delivers high performance LP playback with minimal set up.
A custom tonearm features a rigid, dural-aluminum arm-tube gimbaled in two sapphire (horizontal) and two ceramic (vertical) bearings for the least possible friction. A .5mV moving coil cartridge is included, and features an ebony body with an ellipitcal stylus.
MT10 Turntable Features
Ready To Play
Tracking force, anti-skate and cartridge position are all preset. The MT-10 is ready to use just moments after unpacking.
Matched Tone Arm and Cartridge
The MT10 tone arm features a specially dampened Dural-Aluminium armtube. The light weight and rigidity of the tone arm is an ideal mate for the custom, medium-weight moving coil cartridge.
Massive Platter
The platter is CNC machined from a special silicone acrylic material to a weight of twelve pounds and a thickness of two and one-half inches for near immunity to bass-robbing resonances.
Magnetic Air Damped Bearing
The MT10 Turntable Platter rotates on a special magnetic bearing; literally suspended on a cushion of air for near friction-free performance.
- Precision Motor and Drive Electronics
- Illuminated Speed Meter
- Multi-Layered Damped Chassis Power Control
- Fiber-Optic Illuminated Glass Front Panel
- Super Mirror Chassis Finish
MT10 Turntable Specifications
MCC10 Cartridge Specifications
Output Level
0.5 mV at 5 cm/s
Load Impedance
Greater than 200 ohms, 500 ohms recommended
Frequency Response
20Hz to 50,000Hz
Compliance
6 x 10-6 cm/dyne
Recommended Tracking Force
2.4 g
Channel Difference
Less than 0.3 dB
Total Mass
11 g
Stylus
Elliptical Diamond
Cantilever Material
Aluminum
Body
Ebony wood tone
MT10 Tonearm Specifications
Bearing
Sapphire and Ceramic
Arm Tube
Dural-Aluminum
Counterweight
Eccentric
Adjustments
VTA, Antiskate, Azimuth
MT10 Turntable Specifications
Playback Speeds
33-1/3 rpm, 45 rpm and 78rpm
Motor Type
DC Brushless
Speed Control
Electronic w/ braking feature
Platter
Silicon Acrylic
Platter Bearing
Magnetic
MT10 External Power Supply
Specifications
Output Voltage
24 Volts, 625ma
Power Requirement
100 Volts, 50/60Hz at 400ma
110 Volts, 50/60Hz at 400ma
120 Volts, 50/60Hz at 400ma
220 Volts, 50/60Hz at 400ma
230 Volts, 50/60Hz at 400ma
240 Volts, 50/60Hz at 400ma
General Specifications
MT10 Turntable Specifications
Overall Dimensions
Width is 17-1/2 inches (44.45cm)
Height is 8-13/16 inches (22.38cm)
Depth is 21 inches (53.34cm)
Note: Tone Arm Height will vary depending on type of Cartridge installed.
WEIGHT
62 lbs. net
